|
|
900 MHz Wireless Outdoor Non-Line-of-Sight Point-to-Point Ethernet Bridge |
|
 |
| Long-range 900 MHz wireless outdoor Ethernet bridge |
| Contents: |
(2) AW900x outdoor radios
(2) 110 VAC to 12 VDC power adapters
(2) Power over Ethernet injectors
Requires antennae: Use with AW2,
AW10, AW11, or AW15 |
| Manufacturer: |
Avalan Wireless |
| Part Number: |
AW900x |
|
|
| Price: |
$949.95 |
|
 |
Downloads |
|
|
|
|
Description
Specifications
The AW900x replaces costly wiring with a wireless
Ethernet bridge that can enable remote Wi-Fi APs,
Ethernet pan/tilt/zoom security cameras, VoIP
phones, or Internet kiosks. AvaLAN’s product offers
the ideal combination of price, range, data rate,
security, interference avoidance, quality-of-service,
and ease-of-use.
- Foliage penetrating, non-line-of-sight wireless
Ethernet bridging
- Does not interfere with Wi-Fi networks
- Highest Quality of Service (QoS) available — synchronous point-to-point protocol enables extremely low data latency and jitter
- 128 bit encrypted payload protection provides secure data delivery
- Simple plug and play — pre-configured as matched pairs with no user programming required
- Power over Ethernet enabled
- Operates in the 902-928 MHz band and does not require an FCC license to operate or install
- VLAN extensions supported
The AW900x is the best solution when:
- a Broadband Ethernet drop will cost too much or is impractical to install
- guaranteed DSL-rate throughput is required — (kiosks/Wi-Fi APs/PTZ cameras)
- guaranteed latency for voice or video is — required (PTZ cameras/VoIP)
- Wi-Fi is too slow due to saturation or 2.4 GHz — interference (airport/mall/PTZ cameras)
- ultra-low current consumption is required — (1 Watt/solar powered systems)
Non-line-of-sight Range
- Up to 10x the range of Wi-Fi(with 15 dBi directional antennae)
- Up to 2 miles with 4 trees (with 15 dBi directional antennae)
Line-of-sight Range
- More than 40 miles (with 15 dBi directional antennae)
AW900x Specifications |
|
|
|
|
| RF transmission rate |
1.536 Mb/s |
|
|
|
|
| Ethernet throughput |
935 Kb/s |
|
|
|
|
| Output power |
+21 dBm (4 Watts EIRP used with 15 dBi antenna) |
|
|
|
|
| Receive sensitivity |
-112 dBm at 10e-4 BER with 15 dBi antenna |
|
|
|
|
| Latency |
< 2 ms — assuming a dedicated wireless link to client device |
|
|
|
|
| Jitter |
+0.5 ms — depending on packet size, interference, and SNR |
|
|
|
|
| Power consumption |
FX 0.6 W, TX 1.4 W |
|
|
|
|
| Voltage |
4 to 48 VDC |
|
|
|
|
| Radio channels |
12 non-overlapping |
|
|
|
|
| Automatic frequency select |
Yes — radio channel automatically selected and adaptively optimized |
|
|
|
|
| Manual frequency mode |
Yes |
|
|
|
|
| Status LEDs |
Power, Ethernet Link, RF RX, RF TX, 4/Channel, and 6/Link Quality |
|
|
|
|
| MAC pass-through filter |
Yes — can be disabled |
|
|
|
|
| MAC pass-through filter |
Yes — can be disabled |
|
|
|
|
| Error correction technique |
Sub-block error detection and retransmission |
|
|
|
|
| Adjacent-band rejection |
SAW receiver filter attenuates cellular and pager interference |
|
|
|
|
| Enclosure type |
NEMA 4X |
|
|
|
|
| Temperature range |
-40° C to 70° C |
|
|
|
|
| Power over Ethernet |
Includes injectors/power supplies — 9 to 48 VDC ready |
|
|
|
|
| For more detailed specifications see product datasheets (click here) |
|
|
|
|
|
|
|
|
